# Motion Sensor Package

**URL:** <https://community.info-beamer.com/t/motion-sensor-package/203>\
**Category:** Your info-beamer projects\
**Created:** [December 5, 2018, 8:53pm UTC](https://community.info-beamer.com/t/motion-sensor-package/203 "2018-12-05T20:53:02Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![LoopForYou](https://community.info-beamer.com/letter_avatar_proxy/v3/letter/l/f08c70/32.png) [@LoopForYou](https://community.info-beamer.com/u/LoopForYou)\
**Post date:** [December 5, 2018, 8:53pm UTC](https://community.info-beamer.com/t/motion-sensor-package/203/1 "2018-12-05T20:53:02Z")

</div>

Simple Motion Sensor Package I created based off of [GPIO Demo](https://github.com/info-beamer/package-gpio-demo). Not much information in the package because I essentially simplified the bigger package I made for it to be more simple.

[https://github.com/LoopForYou/package-gpio-motion-sensor](https://github.com/LoopForYou/package-gpio-motion-sensor)

Edit: The pinout shows to connect VCC to the 3.3v, don’t do that. Connect it to the 5v or you might have the PIR Sensor acting funny.

---

<div class="post-metadata">

**Author:** ![infobeamer-fw](https://community.info-beamer.com/user_avatar/community.info-beamer.com/infobeamer-fw/32/3_2.png) [@infobeamer-fw](https://community.info-beamer.com/u/infobeamer-fw)\
**Post date:** [December 5, 2018, 9:44pm UTC](https://community.info-beamer.com/t/motion-sensor-package/203/2 "2018-12-05T21:44:17Z")

</div>

Nice. Maybe that was why my sensor was odd as well when I played around with it. Good information 🙂

---

<div class="post-metadata">

**Author:** ![infobeamer-fw](https://community.info-beamer.com/user_avatar/community.info-beamer.com/infobeamer-fw/32/3_2.png) [@infobeamer-fw](https://community.info-beamer.com/u/infobeamer-fw)\
**Post date:** [December 5, 2018, 9:51pm UTC](https://community.info-beamer.com/t/motion-sensor-package/203/3 "2018-12-05T21:51:17Z")

</div>

A small hint for anyone building custom packages to show here: You can actually make it very easy for others to try out your package by allowing others to install the package with one click. The documentation for that is here: [https://info-beamer.com/doc/building-packages#singleclickinstallbutton](https://info-beamer.com/doc/building-packages#singleclickinstallbutton)

Basically you just add the markdown snippet to your readme and you get a working installation button like the following in your github landing page documentation. Here’s how it works and looks (click it!):

[![](https://community.info-beamer.com/uploads/default/original/1X/d9a4b0d4ca45648b4dc0a9085f098a20031c39ca.png "Install package")](https://info-beamer.com/use?url=https://github.com/LoopForYou/package-gpio-motion-sensor)